Carroll & Meynell 5003 3 Socket Intermittent Transformer 5 Kva 2 x 16A Sockets, 1 x 32A Sockets C/M5003. Primarily for use when using portable electric tools on outdoor sites. – Manufactured to BS En61558 – Thermal overload protection – BS En60309 output sockets as standard – Glass reinforced polyester case – Input flex and 13 amp plug. The 5Kva model without fitted plug, max input current 23amp. – Transformer completely encapsulated for extra weatherproofing These transformers are rated for intermittent operation at their maximum listed power capability for a duty cycle of 25. I.e. 5 minutes ON 15 minutes OFF. They may be used in a continuous operation mode at a rating of 50 of their maximum capability. E.g. a 3.3Kva unit may be operated continuously at 1.65Kva 2 x 16 Amp outlets, 1 x 32 Amp outlet Intermittent transformer This item shipped without an input plug. Maximum input current 23A. Portable Tool Transformer – Safety Instructions 1. The transformer will get warm in normal use, make sure that the heat will not damage any floor covering that it is standing on. It is not advisable to place the transformer onto carpet, vinyl floor covering, etc., and use at continuous rating for any length of time. 4. Although the transformer may be of insulated construction, it is not double insulated (class 2) and the earth pin of the output socket must be connected to the centre point of the secondary winding and to the transformer incoming earth. 2. The transformer may be fitted with an over temperature cut-out switch, in the event of this operating, let the unit cool down then reset the cut-out switch before using again. 5. Power tool transformers must not be tested as class 2 appliances on portable appliance testers, flash test only at 1.5 KV. 3. Check the transformer power rating against the power rating of the tool you are going to use. The transformer can supply Color: Grey. Material: Other Material.