A water-based primer to promote adhesion to stainless steel and non-ferrous metals including galvanised, aluminium, chrome, brass and copper. * Provides a smooth even finish for ideal topcoat adhesion. * Only one coat required. * Quick drying. * Can be used inside or outside. Preparation: * All surfaces must be clean and dry. * Remove loose rust, flaking paint and the gloss from old paintwork by wire brushing and/or rubbing down with coarse abrasive paper. * Treat any rusted patches with Hammerite Kurust. * Degrease thoroughly with a detergent solution then rinse thoroughly with clean water and allow to dry. Appliance: * Stir paint thoroughly. * Do not apply when there is a risk of rain, frost or if the temperature falls below 5degC. * Hammerite Special Metals Primer is touch dry in 30 minutes (depending on weather conditions) and can be overcoated after only 2 hours. * Hammerite Special Metals Primer can be overcoated with most paints. Touch dry in 30 minutes, recoatable after 2 hours. Coverage 8m/per sq litre Colour : Red Product images are representative and may not always show relevant colour, size or finish. Please check product description for correct details Any Questions Please Ask Or Call 0800 652 0990. Material: Other Material.